Digital PS-2000B Series Guía de instalación descargar pdf (Pagina 14)

1) Confirm that the PS-B unit’s power supply is turned OFF.

2) Use a screwdriver to remove the Power Input Terminal Block’s clear plastic

cover.

3) Unscrew the screws from the middle three(3) terminals, align the Ring Termi-

nals

and reattach the screws.

• Confirm that the wires are connected correctly.

• The torque required to tighten these screws is 0.5N•m.

• To prevent the possibility of a Ring Terminal short, use a Ring Terminal

that has an insulating sleeve.

4) Replace the Power Input Terminal Block’s clear plastic cover.

Use the following steps when connecting the power cord to the PS-B’s power

terminals.

φφ

3.2 mm or larger

Max. 6.0 mm

Black

White

Green/

Yellow

*1 Suggested Ring Terminal : RAV1.25-3 <made by JST>

1 2 ... 9 10 11 12 13 14 15 16

Sin comentarios

Digital PS-2000B Series Guía de instalación Pagina 14