Digital LG plus Series Manual de instrucciones descargar pdf (Pagina 127)

5–23

Replacement Procedures and

Illustrated Parts List

Motor Assembly, Paper Feed

Removal

1. Prepare the printer for maintenance (page 4–2).

2. Open the printer cover.

3. Remove the paper path (page 5–29).

4. Loosen four screws and remove the barrier shield (page 5–59,

Figure 5–10).

5. Remove the timing belt cover by squeezing the top and bottom to release

the plastic tabs from the slots in the side plate (page 5–59, Figure 5–10).

6. Loosen, but do not remove, the two 5/16 inch paper feed motor mounting

bolts (page 5–69, Figure 5–15).

7. Loosen the 7/64 inch shaft collar setscrew and remove the paper feed

motor pulley, shaft collar, and paper feed timing belt (page 5–69,

Figure 5–15).

8. Trace the paper feed motor cables back to the controller board, releasing

the cables from the tie–wraps. (See cable routing diagram on page

A–10.)

9. Disconnect connector shell P107 from the controller board.

10. Remove the paper feed motor cable connector from the connector shell

(page 5–8).

NOTE: Some motors are mounted with nuts and bolts; other motors have

threaded flanges, eliminating the need for nuts.

11. Remove the motor mount bolts (and nuts, if present).

12. Remove the paper feed motor assembly.

1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 249 250

Sin comentarios

Digital LG plus Series Manual de instrucciones Pagina 127